其傳動裝置可根據用戶的要求選用電動滾筒或帶驅動架的驅動裝置。
其安裝傾斜角度一般不得大于20°。
TD75 belt conveyor is a series of popular type product, its towing part is made up of cotton canvas, nylon and polyester canvas and steel cord conveyor belt and used for continuous transportation equipment. TD75- belt has the advantages of large amount of transmission, simple structure, low cost, easy to maintain, parts with high degree of standardization to achieve the automatic control of delivery system .It is widely used in mining, metallurgy, power generation, heating ,coal ,and other sectors, and transport a variety of bulk materials and items, the loose density of which is 500-2500kg/m3. Belt conveyor is used in the ambient temperature of-20 ℃ to +40 ℃and distribute materials in the temperature below 50 ℃. On dust-proof, explosion-proof, corrosion resistant demands occasions, it should take other measures.
The gear can according to the requirements of users to choose roller-driven or with push bracket driver device
The tilt angle of its installation is not more than 20°generally.
主要型號及技術參數:
MAIN MODELS AND TECHNICAL PARAMETERS:
承載托 |
帶 速tape?Speed(m/s) |
帶 寬 Width of tape(mm) |
|||||
|
|
500 |
650 |
800 |
1000 |
1200 |
1400 |
|
|
輸 送 量conveying capacity?Q(t/s) |
|||||
槽 |
0.8 |
78 |
131 |
- |
- |
- |
- |
|
1.0 |
97 |
164 |
278 |
435 |
655 |
891 |
|
1.25 |
122 |
206 |
348 |
544 |
819 |
1115 |
|
1.6 |
156 |
264 |
445 |
696 |
1048 |
1427 |
|
2.0 |
191 |
323 |
546 |
853 |
1284 |
1748 |
|
2.5 |
232 |
391 |
661 |
1033 |
1556 |
2118 |
|
3.15 |
- |
- |
824 |
1233 |
1858 |
2528 |
|
4.0 |
- |
- |
- |
- |
2202 |
2996 |
平 |
0.8 |
41 |
67 |
118 |
- |
- |
- |
|
1.0 |
52 |
88 |
147 |
230 |
345 |
460 |
|
1.25 |
66 |
110 |
184 |
288 |
432 |
588 |
|
1.6 |
84 |
142 |
236 |
368 |
553 |
753 |
|
2.0 |
103 |
174 |
289 |
451 |
677 |
922 |
|
2.5 |
125 |
211 |
350 |
546 |
821 |
111 |
輸送長度Conveying length(m)/功率Power(kw) |
≤12/3 |
≤12/4 |
≤6/4 |
≤10/5.5 |
≤10/7.5 |
≤10/11 |
|
|
12-20/4-5.5 |
12-20/5.5 |
6-15/5.5 |
10-20/7.5-11 |
10-20/11 |
10-20/18.5 |
|
|
20-30/5.5-7.5 |
20-30/7.5-11 |
15-30/7.5-15 |
20-40/11-22 |
20-40/15-30 |
20-40/22-37 |
1.表中輸送量是在物料密度為1.0t/m3,輸送機傾角≤18,物料堆積角為30的條件下得出。
2.可輸送物料密度在2.5t/m3以下。
3.輸送長度不局恨于表中所列值,可根據用戶的需要進行制造。
Accessory:
1.The conveying quantity is worked out by the following conditions: material density
is between 1.0 t/m3-1.6 t/m3;conveyor obliquity is less than 18 and the material stockpile angle is 30.
2.Density of material is less than 2.5 T/M3.
3.The conveying length is not restricted to the form; different length can be manufactured according to customers’ demands.